Eddy Current Flaw Detector V2

Vector 50
- Eddy-Current Flaw Detector

A universal eddy current flaw detector with a wide frequency range (from 1 Hz to 20 MHz) designed to address a broad range of
control tasks for ferromagnetic and non-ferromagnetic materials using the eddy current method.

It is developed for inspection of various objects, including aviation engine parts, welded and brazed joints, rods, forgings, carbon
fiber products, etc., to detect surface and subsurface defects (including under coatings), corrosion, damage caused by thermal
effects, and others.

The high power of the device and the unique design of the transducers allow the “Vector-50” flaw detector to be used for
detecting stress corrosion cracking (SCC) in pipelines under insulation up to 25 mm thick.

Ease of Use and Reliability –

The flaw detector combines the latest advancement in analog and digital technology, user-friendly design, ergonomic construction and high reliability. Total weight with batteries 1.5 kg only.

Intuitively understandable user interface –

The VECTOR-50 flaw detector features an intuitively understandable user interface.

Compatibility –

The VECTOR-50 flaw detector can be used with any surface or subsurface eddy current differential and absolute transducers operating at frequencies from 10 Hz to 20 MHz.
It also supports various dynamic (rotational) transducers, including brands like FORSTER, ELOTEST, etc., when using special adapters.

TECHNICAL SPECIFICATIONS

Gain 0 to 70 dB, in increments 0.1, 1, 2, 6, and 10 dB.
Pre-amplifier 0 to 40 dB, in increments 0.1, 1, 2, 6, and 10 dB.
Frequency 1 Hz to 20 MHz, in increments 1, 10, 100, and 1000 Hz.
Transducer excitation amplitude adjustment 12.5%, 25%, 50%, 100%.
Vector Phase Rotation 0 – 359 degrees, with steps of 0.01, 0.1, 1, 5, 10, 45, 90, and 180 degrees.
Low-pass filter Adjustable from 5 to 1000 Hz.
High-pass filter Adjustable from 2.5 to 500 Hz.
Operating modes Standard, sync mode, frequency scanning
Graph types XY, XY+YT, XY+AT, YT, YT+XT  (1 or 2 graphs on the display)
Signal trace 0-30 seconds, with steps of 1 second.
Gates (Amplitude-Sector Diagram) box, segment.
Gate Alarm types defect in the zone, defect outside the zone.
Signal types vector, point.
Transducer types differential, absolute, rotary.
Memory for settings 100 settings.
Memory for results 500 traces.
Screen Colour TFT 640×480 with adjustable brightness and colour gamut. Special background
change function for use in bright sunlight.
Interface USB.
Transducer connectors 1 x Lemo1B + 1 x Lemo0B.
Operating time 10 hours from batteries.
External power supply Power supply block from 220 V, 50 Hz AC.
Power supply voltage 15V/3.5A DC.
Operating temperature range -30º C to +55° C.
Size (H x W x D) 200 mm x 225 mm x 80 mm.
Weight 1.5 kg with batteries

FEATURES

Special Features of VECTOR-50
• Simultaneous display of the signal on the flaw detector screen in amplitude-time and complex planes.
• Separate amplification for the X and Y axes.
• Synchronization mode for working with eddy current rotary transducers.
• Capability to inspect various carbon composites.
• Detection of delamination’s in composites using impedance transducers.
• Large memory for settings and results.
• Two adjustable ASD zones: box and segment.
• Various signal display modes

DOWNLOADS

We want to inform you as well as possible.
That is why we have created information in both print and video that will provide you with comprehensive information.

You receive the most extensive information by a product inquiry.
We have so many individual solutions and ideas that yours is included.

CATALOG
INQUIRY